Description Haisser GA-212BC
The most problems on the site are not caused by the tool itself, but by the wire from it. A cordless grinder clings to the reinforcement with its cord, rubs the insulation against the sharp edges of the metal, and at a height or in a dead end, it generally turns the work into a struggle with an extension cord. The Haisser GA-212BC solves this radically - it is rechargeable. The 18 V Li-ion battery gives complete freedom of movement where the socket is far away or there is no outlet at all: in the field, on the roof, inside a metal structure.
Cuts the same as a chainsaw
The 125 mm disc and 8500 rpm are standard for this class, and these speeds are enough for all typical tasks: cutting rolled metal, cleaning welds, working with cutting and grinding wheels on concrete and stone. That is, switching to a battery does not mean compromising on performance on ordinary materials - it is the same tool, only without a tail. Adjusting the speed allows you to lower the speed on more delicate materials, where excessive speed overheats both the disc and the workpiece.
Little things you feel with your hands
The vibration level of 5.5 m/s² is moderate, and, importantly, it is stated honestly by the manufacturer, without embellishment, which is the sin of budget models. With long continuous work, this directly affects hand fatigue. The spindle lock turns replacing the disc into a matter of a few seconds: you don’t need to catch the shaft with a wrench, just press a button. The M14 thread is the most common standard, so the vast majority of discs and accessories on the market will fit without any adapters.
Housing and application limits
The body is a combination of metal and impact-resistant plastic, weighing about 2 kg: strong enough to survive a fall on the site, and light enough to operate with one hand. The IP20 protection class clearly outlines the boundary - this is a tool for dry conditions, it is not worth working with it in the rain or in a damp basement.
An important point regarding the package: a cordless tool is often supplied as a "body" - the battery and charger for individual positions in the line are purchased separately (this is a normal practice for platforms where one battery powers several tools). Therefore, before ordering, specify the kit for this specific position - in the card or with us. The protective cover is included in the basic set and is mandatory for use regardless of the type of disk. Class - professional, warranty - 36 months.
Who is more profitable to use a battery than a mains one?
The logic is simple: if you already have Haisser batteries of a compatible line - from a screwdriver, drill or other tool - then by purchasing the "body" of the grinder, you expand the fleet without an extra charger for each unit. One battery roams between tools, and it turns out to be noticeably cheaper than assembling a network fleet. For those who work in mobile teams or at sites without stationary power supply, mobility has no alternative at all. And for home use "once a month" the battery is convenient because you don't have to unwind and rewind the grinder every time - you took it out, pressed it, and it's done.
A few words about safety and resource
An angle grinder is a tool that does not forgive negligence. Safety glasses and a cover are always mandatory, the disc is selected strictly for the material and for the permissible revolutions, and a worn or cracked wheel is changed immediately, without "wearing out". The Li-ion battery should not be stored completely discharged and left in the cold - this will extend its service life for years. Following these simple rules turns the GA-212BC into a tool that will serve for a long time and predictably.