m. Сміла, Незалежності, 67г. оф, 406/6
GoodWe GW60KWH-D-10 - base battery cabinet 60 kWh.
Description GoodWe GW60KWH-D-10
GoodWe GW60KWH-D-10 is a basic 60 kWh battery cabinet for commercial energy storage systems. It is a high-voltage solution with a nominal voltage of 633.6 V in the range of 554.4–712.8 V, a charge and discharge current of 96 A and a weight of 1029.5 kg. The key difference from most cabinets of this class is IP55 protection and a built-in automatic fire extinguishing system .
Automatic fire extinguishing: why it's important
Industrial-scale lithium batteries are a lot of energy in a limited space. The risk of fire during normal operation is minimal, especially for LiFePO₄ chemistry, but the consequences of an emergency are so serious that insurance companies and fire inspectorates ask questions every time.
A built-in extinguishing system eliminates most of these issues. It works inside the cabinet, reacts locally, and does not require a separate fire protection project for the premises. In practice, this saves both approval time and money on the arrangement of a separate extinguishing station — and sometimes even decides whether the storage tank will be allowed to be installed at this facility.
IP55 — outdoor cabinet
IP55 protection means resistance to dust and water jets from any direction. For a 60 kWh cabinet, this is a fundamental property: it does not need to be installed inside a building.
The storage device can be placed on a technical site near the transformer room, in the company yard, under a canopy next to the production building. You do not waste production space, do not cut openings to bring in tons of equipment, and do not build a separate room with ventilation. For an operating company, where every square meter is used, this is often a decisive argument.
Technical basis
Operating at 633.6 V keeps the current within 96 A even at full power. This determines the cable cross-section and the ratings of the protective equipment - and this is why high-voltage systems benefit from the cost of the power part compared to low-voltage assemblies of the same power.
The resource is 6000 charge and discharge cycles, the reception/return efficiency is from 95%. Cooling by natural convection: there are no fans inside, so there is no noise, no filters, no moving parts to wear out. Certification - IEC 62619, UN 38.3, CE.
Operating conditions
Charging is allowed at temperatures from 0 to +45 °C, discharging from −20 to +50 °C, humidity up to 95%. It is worth noting the permissible operating altitude of up to 4000 meters: this is a rare indicator for mountain facilities, communication towers and remote production facilities.
Installation is exclusively floor-mounted. Dimensions of 1108 × 2050 × 1112 mm and a weight of over a ton mean that the site must be prepared: a flat concrete base with appropriate load-bearing capacity and access for unloading equipment.
System expansion
This cabinet is the base cabinet — it is from it that the system construction begins. To increase the capacity, expansion cabinets GW60KWH-D-10 Ext. are connected to it, each of which adds another 60 kWh. This approach allows you to start with a real need and purchase additional capacity when the enterprise really needs it.
For facilities of this scale, we prepare a calculation taking into account the tariff plan, load profile and reservation requirements. Send the initial data - we will show the configuration and payback period before you make a commitment.
Characteristics GoodWe GW60KWH-D-10
Reviews about GoodWe GW60KWH-D-10 from real users
No reviews found
