Suntech STP 435 S-H48-Nkh+ - solar panel 435 W

CL-000791
Contact us for a price
Out of stock
14 days
Our advantages
Delivery terms and cost
Payment options

Description Suntech STP 435 S-H48-Nkh+

Solar panel Suntech STP 435 S-H48-Nkh+

On projects sized in tens or hundreds of kilowatts — a commercial roof, a warehouse, a ground-mounted array — the deciding factor is rarely the peak output of a single module; it is the cost of every installed watt. The Suntech STP 435 S-H48-Nkh+ comes from the same line of 96 half-cell N-type TOPCon panels as the higher-wattage versions in the series, rated at 435 W with a module efficiency of 21.78%. It is not a stripped-down variant: same cell technology, same Tier-1 class, same manufacturing tolerances — simply a different power-binning group. For a project where every hryvnia per watt is tracked, that translates into a real procurement saving with no compromise on reliability.

Glass-film build: easier to handle at volume

On a large installation, where dozens of pallets arrive on site, the weight and dimensions of every single panel affect the pace of the crew. At 21.5 kg, the glass-film construction — tempered glass front, polymer backsheet — is noticeably lighter and easier to lift and clamp than a glass-glass equivalent, without giving up the snow and wind load resistance expected of a certified Tier-1 panel. The -40°C to +70°C operating range and 1500 V maximum system voltage support long strings, cutting down on combiner boxes and cable runs across a large array.

N-type TOPCon in the line's base variant

The 96 half-cell N-type TOPCon layout is the same architecture that pushed the industry past classic PERC. Splitting the wafer in half lowers the current each cell carries and, with it, resistive losses inside the module — which matters on the long string runs of a commercial array, where lower current means less voltage drop along the cabling. N-type silicon also avoids the early light-induced degradation p-type PERC cells show in their first weeks of service, so a batch of modules settles into its rated output together and holds it consistently.

Hot metal roofs and diffuse daylight

Commercial roofing — standing-seam metal, flat membrane — runs hotter than a residential pitched roof. TOPCon cells carry a lower temperature coefficient, so at midday heat the module gives up less output than an older-generation panel. Under overcast skies and through the shoulder seasons, when diffuse light dominates, efficiency also stays above the market average — across a large array, that adds up to a noticeable difference in annual yield.

Who it suits

The STP 435 S-H48-Nkh+ is a sound choice for commercial and industrial roofs, warehouses, and economy-class ground-mounted arrays, where the module count runs into the hundreds and the project is judged on cost per installed kilowatt and predictable yield rather than the datasheet peak of a single panel.

A practical note for large orders

When sourcing modules for a large site, installers usually look beyond price per watt to batch uniformity — whether every panel comes from the same binning group, and whether frame and glass tone match across the whole roof. STP 435 S-H48-Nkh+ ships in batches with matched parameters for exactly this reason, which simplifies wiring strings in sequence and gives a large roof a consistent, even appearance without patchy shades of black.

Sizing and ordering

To size a system for a specific roof or plot, contact our managers — the STP 435 S-H48-Nkh+ is in stock, and a bulk order can be reserved against your installation schedule.

Characteristics Suntech STP 435 S-H48-Nkh+

Cell type
N-type TOPCon
Class
Tier-1
Color
Black
Construction
скло-плівка
Frame color
Black
Generation type
Однобічна
Maximum system voltage
1500 V
Module efficiency
21.78%
Number of cells
96 half-cell
Operating temperature
від -40 до +70°C
Power
435 Вт
Technology
Monofacial, Black Frame, N-type TOPCon
General characteristics
Country of origin
People's Republic of China
Country of origin
People's Republic of China
Guarantee
12 months
Manufacturer
Suntech
Overall dimensions
Length
1762 mm.
Thickness
30 mm.
Width
1134 mm.
Physical properties
Material of execution
Скло
Weight
21.5 kg.
Find similar

Reviews about Suntech STP 435 S-H48-Nkh+ from real users

No reviews found

Store addresses
Working hours
Телефон
Availability
Maybe it will interest you
  • Recently viewed
  • Most popular
  • Sale
 
 
 
Швидко і якісно достявляємо

Наша компанія виконує доставку по всій Росії і ближньому зарубіжжі

Гарантія якості і сервісне обслуговування

Ми пропонуємо тільки ті товари, в якості яких ми впенені

Повернення товару протягом 30 днів

У вас є 30 днів, для того щоб протестувати вашу покупку