Catalogue

LG UV60R (60,000 BTU, 15 kW) - the most powerful ceiling-suspended unit of the R32 series

CL-000921
97 63200 ₴
Out of stock
14 days
Our advantages
Delivery terms and cost
Payment options

Description LG UV60R

The UV60R: a 15 kW ceiling-suspended unit

The UV60R completes the ceiling-suspended line of LG's R32 semi-industrial range: 15 kW cooling and 16.9 kW heating. The casing is 1600 mm wide, 690 mm deep and 235 mm high, mounted directly under the slab with no suspended ceiling, panel or ductwork. Supply is 220-240 V, 50 Hz, the refrigerant is R32, the pair works with a Dual Inverter compressor, the casing is metal with plastic parts, manufacturer country and origin are Korea and the warranty is 24 months. Pipe diameters and the maximum run follow from the combination with an outdoor unit and come from the data sheet for the pair. This is the most capacity obtainable from a single indoor unit of this type in the series.

15 kW in one stream: where that is genuinely needed

A 15 kW ceiling-suspended unit is for spaces that need one stream to cover a long distance: a long workshop, a warehouse with tall racking, a sports hall, a car showroom, a station-style waiting area. Its advantage is that a powerful flat stream reaches places no other indoor unit in this category gets to. The price is discharge velocity - in a low room with fixed workstations it will be excessive, and there the same capacity is made up from two smaller units. There is another criterion worth thinking about in advance: one 15 kW unit is a single point of failure for the whole site. For a warehouse holding temperature-sensitive goods, or a continuous production process, two units of 7-8 kW provide redundancy that pays for itself with the first summer breakdown.

Why tall spaces are sized by volume, not area

The habit of counting kilowatts per square metre works only for rooms of standard height; in a hall six metres high the floor area says nothing about the real load. What has to be counted is the air volume, the heat coming through the roof - which in summer gets far hotter than any wall - the goods stored and how often the doors open. A 200 m² store seven metres high contains more volume than a 400 m² office with a three-metre ceiling, and it is harder to cool despite the smaller floor. For such buildings we therefore ask not only for a plan but for sections, or at least heights, and always for the roof construction and whether it is insulated. Without that, any sizing is guesswork, and here the difference between right and wrong is measured in multiples rather than percentages.

Showrooms: equipment in plain sight

In a showroom with large glazing an air conditioner works under the hardest conditions: sun through the window adds a load that vanishes on a cloudy day, and the system has to keep up with those swings. An inverter pair suits that precisely because it changes output smoothly instead of alternating between full power and nothing. Appearance matters too: the unit hangs in view, so its position is agreed with the designer - usually along a blank wall or over a service area where it stays out of photographs of the cars. The stream is directed along the glazing, creating an air curtain that reduces the effect of hot glass on the room. Large showrooms often take two units on opposite walls, offset so the streams do not meet head-on, which gives an even climate across the whole floor.

The outdoor pairing: weight, roof and vibration

For 15 kW cooling and 16.9 kW heating the catalogue offers the single-phase UU60WR (item 1819) and the three-phase UU61WR (item 1823), measuring 950 by 1380 by 330 mm. A unit this size stands on a welded frame with resilient mounts rather than on a pair of brackets: its mass, wind loading and vibration all demand a proper base. On a roof the load-bearing capacity is checked at the mounting point; on a facade it is the wall material that matters, and in an old brick building that is a question for an engineer rather than an installer. A large fan transmits vibration readily through the structure, so rubber or spring isolators go under the frame and the pipe run leaves the unit through a flexible section. Where there are residential windows nearby, the discharge direction is considered from the start and an acoustic screen allowed for.

Redundancy for sites that cannot stop

Where a stoppage means spoiled goods or halted production, the system is built with redundancy: not one 15 kW machine but two of 7-8 kW, running alternately or together at reduced output. That costs more to install but brings three benefits: continued operation when one machine fails, smoother control at part load, and the ability to service equipment without shutting the site down. The AC Smart 5 central controller (item 1907) can rotate units by running hours so they wear evenly, and logs alarms as they occur. For server rooms and process areas redundancy is effectively mandatory, and it has to be designed in from the start, because adding a second pipe run to a finished room is difficult. We always ask what a day without cooling means for the business - the answer shapes the design more than the budget does.

What to keep on site, and whom to call

For equipment that runs continuously it pays to keep a spare set of filters on site, along with the contact details of the firm that installed it rather than a general helpline number. Filters are consumables: while one set is being washed and dried the other is in the unit, so the machine never runs with an exposed coil. The second useful item is a maintenance log with cleaning dates, pressure and current readings: it shows the trend and reveals a problem before it becomes a breakdown. The third is a clear procedure for staff when the system stops: whom to call, what to check themselves, and how to tell a genuine fault from a protection trip caused by heat or voltage. With those three in place, average downtime falls several times over - not as a theory, but as the experience of the sites we look after.

Send a plan with ceiling heights, the roof construction and a list of equipment, and we will size the system by volume and tell you whether one machine or two is the right answer. We will match the pair, the frame for the outdoor unit and a control scheme suited to continuous operation.

Characteristics LG UV60R

Installation type
Стельовий
Electrical properties
Current frequency
50Hz
High-voltage
220 - 240В.
General characteristics
Appointment
Напівпромисловий
BTU
51
Compressor type
Dual Inverter
Country of origin
Корея
Country of origin
Корея
Guarantee
24 months
Refrigerant
R32
Type
Split system
Manufacturer
LG
Overall dimensions
Indoor unit height
690 мм.
Indoor unit length
235 mm.
Indoor unit width
1600 мм.
Physical properties
Material of execution
Combination of metal and plastic
Thermal properties
Cooling capacity
15000 Вт.
Thermal efficiency
16900 Вт.
Find similar

Reviews about LG UV60R from real users

No reviews found

Store addresses
Working hours
Телефон
Availability
Maybe it will interest you
  • Recently viewed
  • Most popular
  • Sale
 
 
 
Швидко і якісно достявляємо

Наша компанія виконує доставку по всій Росії і ближньому зарубіжжі

Гарантія якості і сервісне обслуговування

Ми пропонуємо тільки ті товари, в якості яких ми впенені

Повернення товару протягом 30 днів

У вас є 30 днів, для того щоб протестувати вашу покупку