Catalogue

LG US30F (8 kW) - indoor unit for server rooms with year-round cooling

CL-000922
55 14400 ₴
Out of stock
14 days
Our advantages
Delivery terms and cost
Payment options

Description LG US30F

The US30F: an 8 kW indoor unit for server rooms

The US30F is a wall-type indoor unit from LG's line intended specifically for server rooms and technical spaces: 8 kW cooling and 9 kW heating. The casing is 1200 mm wide, 360 mm high and 265 mm deep, the supply is 220-240 V, 50 Hz, the refrigerant is R32 and the pair works with a Dual Inverter compressor. Manufacturer country and country of origin are Korea, the warranty is 24 months and the casing is metal with plastic parts. The card states the purpose plainly - for server rooms - and that is not a marketing label but a different application logic: cooling all year round regardless of the weather outside. The pair for this unit is the UUC1.U40 outdoor unit (item 1849) at the same 8 kW cooling and 9 kW heating.

Why an ordinary domestic split does not work in a server room

A server room gives off heat around the clock and around the calendar: the equipment does not know it is January and goes on heating the room exactly as it did in July. A domestic air conditioner is designed to cool mainly in the warm season, and with sub-zero outdoor temperatures its cooling mode is either impossible or accompanied by coil icing and protection trips. Equipment for server rooms differs in exactly this: an extended cooling range towards low outdoor temperatures, different control logic for the outdoor fan, and protection against condensate freezing. The precise lower limit for the chosen pair is checked against the data sheet before the sale, because this is not a parameter to take on general assurances. It is this point that gives server rooms fitted with domestic splits their annual winter outages and overheated equipment.

Continuous duty: what it means for the equipment

An air conditioner in a server room runs with no weekends and no seasonal pause, so the demands on its service life are higher than in an office. An inverter pair gains twice in this duty: it holds a steady temperature without swings, and it starts the compressor an order of magnitude less often - and starting is the hardest duty there is. The second element of longevity is maintenance: filters in a technical room clog with dust from cables, cardboard and building work, so they are checked monthly whether or not anyone has been in. The third is a stable supply: dips and surges cause protection trips, and for server rooms we always recommend surge protection and, on a poor network, a stabiliser. With those three covered the equipment runs for years without intervention, which is exactly what is wanted in a room somebody enters once a quarter.

How to size cooling for a server room

Area-based formulas do not apply here: a 15 m² room with a rack drawing 6 kW needs more cooling than a 60 m² office. The basic rule is simple - virtually all the electrical power drawn by IT equipment becomes heat, so the racks' consumption in kilowatts is the basis of the calculation. To that you add heat from the UPS, whose efficiency is not one hundred per cent, from the lighting, and through the building fabric if the room has external walls or windows. For 8 kW of cooling that means an IT load of roughly 6-6.5 kW with a sensible margin for growth. The margin is not a whim: server rooms rarely stay in their original configuration, and two years later the rack holds more equipment than anyone planned for at installation.

Redundancy: one machine is a risk

For a room whose equipment cannot be stopped, the standard is two air conditioners with automatic rotation: each able to carry the load alone, the two running alternately. That gives even accumulated running hours, the ability to service one unit without losing cooling, and a working system when one fails. The rotation logic is set by a central controller - the AC Smart 5 (item 1907) with BACnet IP and Modbus TCP, or the AC EZ (item 1905) for a small number of units. Where the budget will not stretch to full redundancy, the minimum is a second smaller machine able to hold the critical equipment while the main one is repaired. For larger loads the same line offers the US36F (item 1850) with the UUD1.U30 outdoor unit (item 1851) at 9.5 kW cooling.

Where to aim the air in relation to the racks

In a server room the point is not just to cool the air but to deliver it where the equipment draws it in. The classic arrangement is hot and cold aisles: the unit supplies air to the zone in front of the rack faces, while hot air from the rear returns to the air conditioner. Blowing directly at the back of a rack achieves the opposite: hot and cold air mix, the equipment's sensors see a higher temperature and the server fans spin up to maximum. The second point is condensate: an indoor unit is never hung directly above a rack, because even a small leak in that position ends expensively; where there is no alternative, a drip tray with its own drain goes underneath. The drain line in a server room is checked more often than anything else, because it is the one thing capable of damaging the equipment itself.

Automatic restart after a power cut, and monitoring

The commonest misfortune in a server room looks like this: there was a power cut, the generator or UPS did their job, the equipment came back up - and the air conditioner stayed off, because it did not restart itself when the supply returned. Equipment of this class has an auto-restart function that restores the previous settings, and it is enabled during commissioning - two minutes of work that saves hardware worth tens of thousands. The second essential is alerting: a temperature sensor with its own power supply and GSM or network notification warns of a rise before the servers' own protection acts. The third is the log: a central controller keeps a history of alarms that shows whether a stoppage was a one-off or repeats weekly. Together these three cost little and cover most of the failure scenarios that actually occur.

Tell us the total power drawn by the racks and the room area, and we will calculate the capacity needed with a margin for growth and propose a redundant arrangement. The outdoor pairing, the controls and the monitoring will be chosen so the server room does not depend on who switched the air conditioner off last night.

Characteristics LG US30F

Installation type
Wall
Electrical properties
Current frequency
50Hz
High-voltage
220 - 240В.
General characteristics
Appointment
Для серверних приміщень
BTU
27
Compressor type
Dual Inverter
Country of origin
Корея
Country of origin
Корея
Guarantee
24 months
Refrigerant
R32
Type
Split system
Manufacturer
LG
Overall dimensions
Indoor unit height
360 мм.
Indoor unit length
265 мм.
Indoor unit width
1200 мм.
Physical properties
Material of execution
Combination of metal and plastic
Thermal properties
Cooling capacity
8000 Вт.
Thermal efficiency
9000 Вт.
Find similar

Reviews about LG US30F from real users

No reviews found

Store addresses
Working hours
Телефон
Availability
Maybe it will interest you
  • Recently viewed
  • Most popular
  • Sale
 
 
 
Швидко і якісно достявляємо

Наша компанія виконує доставку по всій Росії і ближньому зарубіжжі

Гарантія якості і сервісне обслуговування

Ми пропонуємо тільки ті товари, в якості яких ми впенені

Повернення товару протягом 30 днів

У вас є 30 днів, для того щоб протестувати вашу покупку