Catalogue

LG CL09R (9,000 BTU, 2.5 kW) - low-static ducted indoor unit 190 mm high

CL-000898
48 81600 ₴
Out of stock
14 days
Our advantages
Delivery terms and cost
Payment options

Description LG CL09R

The CL09R: a 2.5 kW ducted indoor unit

The CL09R is a ducted indoor unit of LG's R32 semi-industrial series rated at 2.5 kW cooling and 3.2 kW heating. It measures 900 mm wide, 700 mm deep and only 190 mm high; the casing is metal with plastic elements, the supply is 220-240 V, 50 Hz and the compressor in the pair is a Dual Inverter. Per the card the circuit pipework is 1/4 inch (6.35 mm) liquid and 3/8 inch (9.52 mm) gas, with a maximum pipe run of 15 metres and a height difference of up to 10 metres. The manufacturer country and country of origin are Korea and the warranty 24 months. It is important to understand that this is an indoor unit only: an outdoor unit of matching output is required, and the pair is verified against LG's compatibility table.

Why people choose a ducted unit

A ducted unit is the only type that disappears from the interior entirely: the equipment stays above the suspended ceiling and all the room shows is two grilles. For a boutique, a meeting room, an office, a salon or a hotel room that is the decisive argument: the design does not have to be adapted to an air conditioner. The second benefit is quiet in the occupied zone: the fan sits behind the ceiling, and the structure and the length of ductwork muffle the sound. The third is flexibility: one unit can supply air to two or three small rooms if they run in the same regime. There is a drawback worth knowing in advance: access to the filters and the coil is only through an inspection hatch, and if it is not provided when the ceiling is built, servicing turns into dismantling.

Low static pressure at 190 mm: what it means in practice

A height of 190 mm makes this one of the slimmest units in the series, but compactness comes with a limitation: a low-static fan is not designed for long or branched ductwork. The realistic geometry is a supply of 2-4 metres of duct to one or two grilles with a minimum of bends; every take-off and every metre of flexible duct adds resistance, and the airflow falls faster than one might expect. If the system resistance exceeds the rated static pressure, the unit does not merely run quieter - it stops delivering its rated capacity, and in cooling the coil begins to ice up. Rigid galvanised ductwork beats flexible duct in everything but installation cost: at the same cross-section its resistance is several times lower. For complex layouts with long runs, medium-static units are used - the CM18R (item 1828) or CM24R (item 1829).

Ceiling void and access for servicing

The 190 mm is the casing dimension; in reality 280-320 mm of void is needed, because vibration mounts on the hangers, a drain line with a fall and pipe insulation are all added to the unit. If less space is available the unit simply cannot be fitted, and that is the commonest cause of rework once on site. An inspection hatch of at least 450 by 450 mm is placed on the side of the filter and the electrical box - that is enough for cleaning and for replacing a board. The drain is run with a constant fall of 1-2 centimetres per metre; if a fall is impossible because of beams or services, an ABDPG drain pump (item 1914) is fitted. The unit hangs on threaded rods with rubber isolators: a rigid hanger transmits fan hum into a plasterboard ceiling, and the room gains a noise that appears in no data sheet.

Air distribution for 2.5 kW

The airflow of a 2.5 kW unit is relatively modest, so grilles are selected so that the velocity through the free area does not exceed 2-2.5 metres per second - above that, grille noise becomes noticeable. For this capacity one supply grille of 400 by 150 mm or two smaller ones is typical, plus a return grille of no smaller area with a filter. The supply is positioned so that the stream runs along the ceiling rather than into people: cooled air descends on its own and mixes naturally. The return grille is kept at a distance from the supply, otherwise the unit will recirculate the same air in a short loop and the room will take twice as long to cool. This is best planned with the ceiling designer before the ceiling is built rather than after: moving grilles in a finished ceiling is expensive.

Pairing with an outdoor unit

By output the CL09R pairs with the UU09WR outdoor unit (item 1812) at 2.5 kW cooling and 3.2 kW heating. The circuit runs on R32; the card's limits are 15 metres of pipe run and 10 metres of height difference, which are perfectly sufficient for an apartment, an office or a floor of a small building. Beyond roughly 7-10 metres of run a refrigerant top-up is needed at the manufacturer's rate per metre - the installer does this and records it in the documents. The outdoor unit required is single-phase, and at 220-240 V the current of such a system is small: a dedicated circuit and breaker are enough without raising the authorised capacity. We verify the final combination against the manufacturer's compatibility table: we do not propose a pair that is absent from LG's documentation.

Which jobs it fits and where it is out of place

The CL09R is the choice for a space of roughly 20-28 m² with a suspended ceiling: an office, a meeting room, a small shop, a salon, a hotel room, a server cabinet in a separate room. It suits cases where the equipment is deliberately kept out of sight and the duct run can be kept short. Where the model is out of place: a space without a suspended ceiling, or with less than 280 mm of void - a wall or suspended unit is used there; layouts with long branched ductwork, which need the medium-static CM series. It also does not suit a space needing individual temperatures in several zones: one unit holds one regime for the whole circuit. And if the area exceeds 30 m² or the space has serious heat gains, 2.5 kW will not be enough - the sizing is done by heat gains.

How it differs from neighbouring models in this catalogue

The CL12R (item 1825) is the same 190 mm high casing but 3.5 kW: the next step in capacity. The CL18R (item 1826) is 5 kW in the same envelope, and the CL24R (item 1827) is 7 kW in a wider 1100 mm casing. The CM18R (item 1828) and CM24R (item 1829) are medium-static units 270 mm high for long ductwork. If there is no suspended ceiling, the alternatives at the same output are the CT09R cassette (item 1834) set into a ceiling opening or the MJ09PC wall unit of a multi-split system (item 1870). The outdoor unit for this model is the UU09WR (item 1812); the same unit pairs with the CT09R, which lets you decide the indoor type after the question of where to put the outdoor unit is settled.

Tell us the floor area and the ceiling void available - we will check whether the CL09R fits and work out a duct and grille layout.

Characteristics LG CL09R

Gas pipe
3/8 (9.52) inch/mm
Installation type
Канальний
Liquid pipe
1/4 (6.35) inch/mm
Max. pipeline length
15 m.
Electrical properties
Current frequency
50Hz
High-voltage
220 - 240В.
General characteristics
Appointment
Напівпромисловий
BTU
9
Compressor type
Dual Inverter
Country of origin
Корея
Country of origin
Корея
Elevation difference
10 m.
Guarantee
24 months
Refrigerant
R32
Type
Split system
Manufacturer
LG
Overall dimensions
Indoor unit height
190 мм.
Indoor unit length
700 мм.
Indoor unit width
900 мм.
Physical properties
Material of execution
Combination of metal and plastic
Thermal properties
Cooling capacity
2500 Вт.
Thermal efficiency
3200 Вт.
Find similar

Reviews about LG CL09R from real users

No reviews found

Store addresses
Working hours
Телефон
Availability
Maybe it will interest you
  • Recently viewed
  • Most popular
  • Sale
 
 
 
Швидко і якісно достявляємо

Наша компанія виконує доставку по всій Росії і ближньому зарубіжжі

Гарантія якості і сервісне обслуговування

Ми пропонуємо тільки ті товари, в якості яких ми впенені

Повернення товару протягом 30 днів

У вас є 30 днів, для того щоб протестувати вашу покупку