m. Сміла, Незалежності, 67г. оф, 406/6
Renesola RS9-710NBG-E1 Bifacial - solar panel 710 W
Please sign in so that we can notify you about a reply
Description Renesola RS9-710NBG-E1 Bifacial
Solar panel Renesola RS9-710NBG-E1 Bifacial
What says the most about a module's quality isn't the nameplate power but how it behaves where conditions are far from ideal. The Renesola RS9-710NBG-E1 Bifacial, rated at 710 W, is engineered with a margin of resilience: a -40°C to +85°C operating range, IP68 protection and a glass-glass build designed for conditions where polymer-backed panels tend to fail early.
Built for both heat and frost
The -40°C to +85°C operating range covers virtually the entire spectrum of Ukrainian and Eastern European climate — from a freezing winter to a scorching summer rooftop. Across that swing, what matters most isn't simply that the module keeps working, but how stable its output stays: the N-type TOPCon cells it is built from are less sensitive to temperature-related power loss than older technologies, so summer output drops less than with conventional panels.
Glass-glass against moisture, PID and micro-cracks
Instead of a thin rear backsheet, the RS9-710NBG-E1 uses full tempered glass on both sides. This construction significantly reduces the risk of moisture entering the laminate, improves resistance to potential-induced degradation (PID) and to micro-damage from temperature swings, wind and snow loads. The IP68 rating confirms the junction box stays sealed even under prolonged exposure to water or dust.
132 half-cells and bifacial generation
At its core are 132 N-type TOPCon half-cells and a bifacial layout with a generation factor of 80% ±5%. First-year degradation does not exceed 1%, followed by 0.4% per year, and after 30 years the module retains roughly 87.4% of its initial power — a figure backed by the manufacturer's thirty-year performance warranty. At the maximum power point the module delivers 41.18 V and 17.24 A, values that align well with most modern grid-tie and hybrid inverters.
On sites near the coast, in humid zones or in the dusty air of industrial facilities, it is precisely the glass-glass build and sealing quality that determine whether a plant reaches its stated service life without losing output. Installers working in demanding climates consistently find that cutting corners on the rear-side construction rarely pays off over a 15-20 year horizon.
Who it suits
The Renesola RS9-710NBG-E1 Bifacial suits coastal and industrial sites, regions with sharp swings in temperature and humidity, and any project where long-term stability of output matters more than resistance to weather extremes alone.
Contact our managers if your site sits in a demanding climate — we'll help configure the system with the real structural loads in mind.
Characteristics Renesola RS9-710NBG-E1 Bifacial
Bidirectional generation coefficient
80% ±5%
Cell type
N-type TOPCon
Class
Tier-1
Color
Срібний
Construction
glass-glass
First year degradation
≤1%
Frame color
Срібний
Further degradation
0.4%/рік
Generation type
Two-way
Maximum system voltage
1500 V
Module efficiency
22.87%
MPP current
17.24 А
MPP voltage
41.18 В
Number of cells
132 half-cell
Operating temperature
from -40 to +85°C
Performance guarantee
30 років (≈87.4%)
Power
710 Вт
Protection class
IP68
Residual capacity 30 years of operation
≈87.4%
Technology
Bifacial, Double Glass, N-type TOPCon
General characteristics
Country of origin
People's Republic of China
Country of origin
People's Republic of China
Guarantee
12 months
Manufacturer
Renesola
Overall dimensions
Length
2384 мм.
Thickness
33 мм.
Width
1303 мм.
Physical properties
Material of execution
Скло
Weight
38.7 кг.
Reviews about Renesola RS9-710NBG-E1 Bifacial from real users
No reviews found
Store addresses
Working hours
Телефон
Availability
Smila
Uman
